Air In Water Lines Every Morning [7+ Reasons + Solutions] 

Air in water lines every morning is mainly the result of the lack of water system maintenance. The reasons can be as minor as a period of shut-off water or high water pressure. 

Apart from it, there can be considerable reasons like a leak in the pipes or decomposition drainage. Malfunctioning from the water heater or well water system is likely the factor behind the issue. So don’t be ever tempted to ignore the matter. 

Before any other troubleshooting keeps the faucets turned on for 2-3 minutes. If it can’t sort out, here we are with the nicely explained article.

You’ll get all the causes of discharging air from the water fixtures of your house & the things you need to check out to resolve the matter in this article. So, let’s get to the point.

Is Air in Water Lines Causes Plumbing Challenges 

At times, you may see the air in your water lines creating a scope of unusual noises. Although the little air bubbles don’t cause great damage to the plumbing systems, significant air in water lines can be a reason for inconvenient defects.

Now you may be wondering what challenges can even be caused by the air. Airlocks may introduce you to rust and corrosion build-up in the water lines. This rust can also drop sediments into the water.

Over time if the issue is prolonged too long, rust & corrosion can weaken the water pipes. Due to these airlocks, inadequate water supply becomes so common.

So, it’s obvious that the significant air in lines isn’t a matter to be neglected always.

Signs Of Air in The Water Line

More often than not, you may experience the air in the water lines. This is the kind of problem that you sure don’t want to endure for a long time. 

There are some signs for which you can bet there is air in the water plumbing systems in your house. Here they are-

• Erratic water pressure 
• Vibrating Noise 
• Sounds like loud gurgling 
• Hiss or pops accent
• Strange smells

How To Remove Air in Water Pipes In House [A Quick Fix]

In that scenario where the water supply is shut off for a while like it’s in the night or you have installed a new pipe, the air in the lines is nothing to worry about. 

You just need to act per the easy steps described for the most occurrence of the issue. 

Step 1: Turn Off the Water Supply

The first you need to do is to close the Main shut-off valve. You can find the shut-off valve somewhere in your basement from where the water supply enters the house. 

If the shut-off valve is hard to turn off due to hard water calcification don’t force it. Just take the help of the plumbing experts. 

Step 2: Twist All The Faucets

To let all the air forced out from the water pipes, twist all the faucets of your house. Open them for about halfway & let the water run for about 1 to 2 minutes. 

Flush all the toilets one or two times. Run the dishwasher & the washing machine also. 

Step 3: Turn On The Water Supply Back

Now when you get the assurance that all the air must flow out from the pipes, turn on the Main shut-off valve. 

Let the water flow from the faucets & flush the toilet to refill them with water. Now take a walk to all the faucets & see if there is any sign of airlocks. If won’t, turn off the faucets. 

Air In Water Lines Every Morning [7+ Easy Solutions]

Still wondering why I am getting air in my water lines after trying the quick fix, you may need to check several factors of your plumbing system now. 

Here you’re going to find all those reasons as well as practical solutions. So, let’s get started.

1. Piping Leaks

One of the most possible reasons for introducing air into the plumbing system in the morning is the leaks in the pipes. 

Leaks of the pipes are a sign that there is some kind of damage on the lines letting the water get into the water supply. 

As a result, when you turn on the faucet you get sputtering water. So, take the matter into consideration. 

Solutions:

Check all the water pipes in your house. If you find any sign of a crack in the pipes, fix it. You can repair the leaks by several methods like

• Applying water pipe epoxy 
• Using pipe wraps 
• Utilizing pipe clumps or rubber pipe connectors 
• Plumbing repair taps or 
• Enact repair sleeves. 

It’s also a fact hard to find out the leaks in the water pipes and especially diagnose which pipe is having cracks letting a scope enter the air bubbles. In this case, it’s better to take the plumbers’ help.

2. High Water Pressure

In the pump-generated water system, the level of water is the most common phenomenon when water sputters out of the faucet in your bathroom or kitchen sink. 

When there is a high-water pressure in the water supply of your house, you’re likely to have air in the water pipes or the water lines. 

According to Bernoulli’s theorem, when there is a decrease in pressure, it increases the speed of the water in the water lines. The case is normal when you turn on the faucet in the morning or there is a wellspring of water. 

The normal water pressure for a household is between 40 to 60 psi. It should not be low than 40 or not higher than 80 psi. Nowadays most modern house has built -water pressure regulator somewhere near your water mains serving. 

If you find this water pressure regulator faulty or the regulator needs repair, take the consultation of the plumbers. 

3. Decomposed Drainage

When you’re experiencing the air in the water pipes of your house in the morning, the decomposition of the drainage is another thing that lets you face it. The materials in the drainage are apt to decompose. 

While the decomposing process is bound to produce gases. These undissolved gases or wastewater air can get trapped in the pipes. As a result, you find airlocks that we said sputter water from the pipes. 

Solutions:

To resolve the matter, the best solution is the pump bursting method. It’s a technology by which you can reopen the existing pipes & by the bursting tools the wastage is forced out of the pipes.

If your water pipes need the pump bursting, you may get the assistance of the experts.

4. Water Heater Issue

When you’re using a water heater in your household, the heater can also make you have air bubbles in the water. 

When there is a faulty hose connection or leakage you can get air bubbles in the hot water lines. 

Due to this sediment, other particles can get into it and make space for air to enter. This Defective anode rod can also be enough possible reason for experiencing air in the water lines. 

In some cases, the magnesium anode rod of the water heater reacts with the salt water and creates matter. 

Solutions:

• First, turn off your water heater and let the hot water faucets run for a few minutes. See if it can solve the sputtering of the water. 
• Ensure there is no loose hose connection or water leakage anywhere in the water heater. Clean out any sediment build-up. 
• As the anode rod can also make the issue, look through the anode rod. In some cases, replacing the magnesium rod with an aluminum rod can completely cure the air in the water lines issue.

5. Water Softener Malfunctions

Now at this point, if you are having a water softener in your household, it is possible that due to some malfunctions, you are likely to have air in the water pipes. 

Probably when the softener is regenerated every night, you get the air sucked in the lines in the morning. The brine line of the softener is another way to get the air into the water system. 

Leaks, loose brine nuts & dirty seating can mess up the softener and creates the issue. When there is air in water lines after the softener regenerates, the air check can be also at fault as it can be dirty. 

Solutions:

• First, ensure there is no leak in the brine line in the brine tank. 
• Check all the brine nuts. If you find them loose, tighten them up snugly. 
• Look through the brine pick-up end to be all-way clear and seating to be correctly fitted. 
• If the air check is dirty, clean it up. The process is very easy. Just remove the air check from the brine tank. Soak it in the bleach for about 2-3 minutes and rinse it with water. You’re all done, now only re-install the aircheck properly.

6. Malfunctions From The Well Water Lines

If the air in well water lines is the first thing to face every morning, then it’s a sign that your well water system needs a checkup. 

Several factors affect the well water system and the air got to mix into the water lines. To know the common causes and their solutions, take a look at the below. 

Cause 1: Ruptured air bladder

When the giant air bladder of the well becomes ruptured, the air is likely to suck up into the lines. Check the air bladder. If you find it faulty or ruptured, take the initial steps.

Cause 2: Water pressure tank

It maintains the water flow to the good system. If the setting of the pressure tank got disturbed, air may get into the lines. 

Let the water flow for 2-3 minutes. Check the air setting of the water pressure tank with a pressure gauge. It should be 2-3 psi less than the lower setting of the pressure switch. 

Cause 3: Well pump issue

Look through the well pump if it’s faulty. Check the position of the pump in the well & ensure that it’s properly sized.

If it requires servicing, you can contact a plumber. 

Cause 4: Presence of gas

Often several gases like methane, carbon dioxide, and hydrogen sulfide find their way anyhow to get into well water. Gases like hydrogen sulfide can even smell like rotten eggs. 

If this happens, test the water of your well. What treatment the well water requires depends on the concentration of the gases in the water.

7. Poor Plumbing

Poor plumbing of the water lines can also be the ultimate reason for the issue. A poor plumbing system like loose or broken valves lets the air escape into the water lines and makes the scenes like unusual sounds or sputtering water from the faucets. 

Now you may have to figure out if there is any poor plumbing system in your house. It can be a call for the plumbing experts. 

They will check out all the plumbing systems & diagnose whether there is any serious issue or not. This checking will also assist you in not experiencing any kind of issue apart from the spurting water matter from the advance.

How To Prevent Air Formation In Water Lines

Apart from proper maintenance of your water supply system, air valves can be a good option to prevent air formation in the water lines of your household. Because it’s always smart to keep the water maintenance in check for preventing any sort of water issue on the water faucets. 

Actually, air valves are hydromechanical devices that are designed to release air plus wastewater gases automatically from the water lines. 

To get the maximum efficiency of the air valves choosing the right valves for the right places is a must. For that purpose, you can install the air valves at the-

• High points of the water lines
• Long horizontal lines
• Sections of long ascents and descents 
• Adjacent point of the lines
• On a decreased-up slope 
• On an increased downslope

FAQs:

Ending Thoughts

Let’s wrap up the whole article. We have tried our utmost to come to you with all the probable reasons as well as the all-proved solutions. 

Hope that you have gotten a detailed idea of air in water lines every morning and sorted it out effectively. 

Still, in case you have any in your mind or any idea that you want to share, please let us know through your comment. Thank you so much for staying tuned with us till the end.